CADDY® 122, 123 Clip Range

Print this page

The CADDY range of 122, 123 clips are designed for installation of services to angled purlin section.

Features

122 Clip

Profile section maximum thickness of 2.8 mm
Return flange height >= 15 mm
EPZ corrosion protection
Can be used in combination with HSC Snap Clip

122-MA Clip

Same general characteristics as the 122 clip
For fast and accurate height adjustment, simply squeeze the spring steel component
The load rating applies to the threaded rod vertically suspended

122-Ti/T Clip

Same general characteristics as the 122 clip
MTi - 6, 8 or 10 mm thread impression clips
T10 - 11 mm clearance hole for use with threaded rods up to 10 mm diameter
VKM or HM accessories
Mti/T10 components will swivel to allow for variable purlin angle

123 Clip

Same general characteristics as the 122 clip
Ø 7 mm clearance hole
EPZ corrosion protection

123-M Clip

Same general characteristics as the 122 clip
Conduit clip rotates 360°
The conduit clip is locked with pliers

123-P Clip

Same general characteristics as the 122 clip
Conduit is simply pushed into position

Applications

For quick and easy installation of various services to angled purlin section.

More Information

122 - Spring steel clip for the suspension of chain and wire from purlin section

Description	Part No.	A mm	Protection	Pack	Load
122	171690	<2.8	4	100	45

122-MA - For rapid installation of services to purlin section with threaded rod

Description Part No. A mm Ø Protection Pack Load

122 M6MA 174680 <2.8 M6 4 100 45

122 M8MA 174690 <2.8 M8 4 100 45

122 M10MA 174700 <2.8 M10 4 100 45

122-Ti/T - For use with threaded rod

;

Description Part No. A mm Ø 1 Ø 2 Protection Pack Load

122M6Ti 174890 <2.8 M6 7 4 100 45

122M8Ti 174980 <2.8 M8 8.5 4 100 45

122M10Ti 175070 <2.8 M10 11 4 100 45

122 T10 160240 <2.8 11 11 4 100 45

123 - For suspending or attaching services to angled purlin section

Description Part No. A mm Protection Pack Load

123 171700 <2.8 4 100 45

123-M - For the installation of conduits to angled purlin section

Description Part No. A mm Ø mm Protection Pack Load

123 6M 174760 <2.8 14-18 4 100 45

123 812M 160420 <2.8 18-30 4 100 45

123 16M 174790 <2.8 30-35 4 100 45

123 20M 177760 <2.8 35-42 4 50 45

123-P - For the installation of conduits to angled purlin section

Description Part No. A mm Ø mm Protrection Pack Load

123 8P 176720 <2.8 18-22 4 100 11

123 12P 176730 <2.8 22-30 4 100 11

123 16P 176740 <2.8 30-35 4 100 11

Availability

Asia/Australia
Europe/Middle East/Africa

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.