Cette page est disponible en anglais uniquement  Ne plus afficher ce message
  FranceChange

LENTON® QUICK-WEDGE Mechanical Lap

LENTON® QUICK-WEDGE  Mechanical LapPrint this page

The LENTON® QUICK WEDGE splicing system from ERICO® is a simple and quick alternative for joining small diameter reinforcing bars. The splice consists of an oval-shaped steel sleeve and a wedge pin. Installation is made in seconds by overlapping rebar in the steel sleeve and driving the wedge pin between the bars with a portable hydraulic hand tool.

Features

  • Minimizes length of exposed rebar dowel - eliminates excessive concrete chipping in retrofit installations
  • Bars can be cut to the approximate size spanning between the rebar being joined
  • Lightweight hand-held hydraulic pin driver designed for minimum clearance situations
  • Joins #4 (12 mm), #5 (16 mm) and #6 (20 mm) reinforcing bars
  • In-situ splicing with minimum dowel length requirement for bar smaller or equal to #6 (20 mm)
  • Low cost
  • Visual inspection possible
  • Simple to use
  • Connections can be made in virtually any weather
  • Can make up to 100 splices per hour

Applications

Lapped bar capability and minimal exposed bar ends make the LENTON QUICK WEDGE system ideal for repairs or expansions including:

  • Bridge Repair
  • Road Repair
  • Precast
  • Building Extensions
  • Spiral Reinforcement
  • Stirrups and Ties
  • Pile Extensions
  • Epoxy and Galvanized Coated Rebar

More Information

How to Specify
By Name:
LENTON QUICK WEDGE Mechanical Lap Splice manufactured by ERICO, Inc.

By Generic Description:
Bars shall be Mechanically Lap Spliced using steel sleeve and wedge pin assembled in accordance with manufacturer’s recommendations to produce a positive connection.

LENTON QUICK WEDGE Installation

Step 1

 Quick-Wedge Installation Step 1

Step 2

Quick-Wedge Installation Step 2

Step 3

Quick-Wedge Installation Step 3

Position the sleeve onto the rebar.
Bar ends must be at least flush with sleeve ends.

Place the pin in the driver.

Position the pin-driver on coupler and drive pin.
Please note that this is a guide to installation only. Full instructions will be supplied at time of product purchase.

Downloads

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.